Campbell TX312 Specifikace stáhnout pdf (Strana 38)

TX312 Transmitter

TABLE 5.2-7. Error Codes

Error Codes:

Hex Decimal

0x00 00 No error

0x01 01 Illegal command

0x02 02 Command rejected

0x03 03 Illegal checksum or too much data

0x04 04 Time out or too little data

0x05 05 Illegal parameter

0x06 06 Transmit buffer overflow

0x10 16 Message abort due to PLL

0x11 17 Message abort due to GPS

0x12 18 Message abort due to power supply – internal 16 volt – RF

0x13 19 Software fault

0x14 20 Failsafe fault

0x15 21 GPS time sync fault

0x16 22 SWR fault – transmission antenna connection

0x19 25 Internal RF power supply failure

See Section 5.1.2.4 for more information.

5.2.5.6 P127, Command 5: Clear TX312 Error Registers

Clear error registers of TX312. Requires one input location.

TABLE 5.2-8. P127 Command 5: Clear Error Registers

In Loc Contents

1 Result Code

Result code of 0 indicates success. Command 5 is used to erase all errors from

the error registers of the TX312.

5.2.5.7 P127, Command 6: Return TX312 to on-line mode.

Command 6 is used to return the TX312 to online mode. Typically used after

a forced random transmission. The TX312 has an off-line time-out of one

hour.

TABLE 5.2-9. P127 Command 6: Force On-line Mode

In Loc Contents

1 Result code

Result code of 0 indicates success.

5.2.6 Edlog Programming Examples

Edlog instruction 126 is used to copy data from the datalogger final storage

area to the TX312 data buffer.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 95 96

Žádné komentáře

Campbell TX312 Specifikace Strana 38