Campbell RavenXTV CDMA Manuál stáhnout pdf (Strana 25)

RavenXTV CDMA Sierra Wireless Cellular Modem

g. If you have a Dynamic IP account, you will need to have a DDNS

(dynamic domain name server) name that LoggerNet can reference to

make the connection (Section 5.1, Configuring the Raven for Dynamic

IP).

2. Connect with the modem through the serial port using AceManager.

a. If the modem has been configured for “PPP” (see Appendix B,

Configuring the Raven Modem for PPP), then you may have to check

the “Use SOS Mode” box.

b. From the “Status” group, make sure the “Network State” is “Network

Ready”, and note the “Network IP” address. This is the current IP

address for the modem (a dynamic IP address will change each time

the modem is reset). Try connecting to this IP address using

LoggerNet. If LoggerNet connects with the IP address, but not with

the modem name.domain name, then there may be a problem with the

Dynamic IP setup in the modem (Section 5.1, Configuring the Raven

for Dynamic IP).

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 47 48

Žádné komentáře

Campbell RavenXTV CDMA Manuál Strana 25