Campbell LWS-L Návod k obsluze stáhnout pdf (Strana 31)

Manual Firmware Update

CZ76372,000072B -19-20OCT14-1/1

Manual Firmware Update

Firmware Update Files

To locate latest version of John Deere Field Connect™

gateway firmware and release notes, go to Downloads

and Updates section at StellarSupport.com.

Installation Instructions

1. Ensure USB drive is formatted to FAT32.

IMPORTANT: File must be named GWFRMWR.BIN

to be recognized by gateway as a firmware

update file. Remove any other firmware update

files in any folders on USB drive.

2. Copy update file to root of USB drive.

3. Verify battery voltage is above 12.2 V.

4. Insert USB drive into USB port on gateway.

5. USB LED flashes blue and transitions to yellow and

teal. Wait approximately 3 - 10 minutes.

6. Unit automatically resets and all LEDs turn on

momentarily.

7. If update is successful, USB LED turns solid green.

Remove USB drive and USB LED turns off.

8. Verify GPS time source is valid. It is valid once GPS

LED is solid.

9. Press multifunction button on gateway.

•

If GPS time source is valid, all LEDs flash once.

•

If GPS time source is invalid, all LEDs flash three

times.

GPS time source has to be valid for gateway to

recognize probe.

35-1

102914

PN=31

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 51 52

Žádné komentáře

Campbell LWS-L Návod k obsluze Strana 31