Campbell CNR1 Specifikace stáhnout pdf (Strana 21)

CNR1 Net Radiometer

;Measure CNR1 temperature

3: Full Bridge w/mv Excit (P9)

1: 1 Reps

2: 22 50 mV, 60 Hz Reject, Slow, Ex Range

3: 22 50 mV, 60 Hz Reject, Slow, Br Range

4: 5 DIFF Channel

5: 1 Excite all reps w/Exchan 1

6: 4200 mV Excitation

7: 5 Loc [ Temp_C ]

8: 1 Mult

9: 0 Offset

4: Temperature RTD (P16)

1: 1 Reps

2: 5 R/R0 Loc [ Temp_C ]

3: 5 Loc [ Temp_C ]

4: 1.0 Mult

5: 0 Offset

5: Z=X+F (P34)

1: 5 X Loc [ Temp_C ]

2: 273.18 F

3: 6 Z Loc [ Temp_K ]

;Output data to final storage every 60 minutes

6: If time is (P92)

1: 0 Minutes (Seconds --) into a

2: 60 Interval (same units as above)

3: 10 Set Output Flag High (Flag 0)

7: Real Time (P77)

1: 0220 Day,Hour/Minute (midnight = 2400)

8: Average (P71)

1: 6 Reps

2: 1 Loc [ CM3_up ]

Copy range code options from example 1 here:

* Proper entries….

* Proper entries will vary with program and input channel usage.

** 25 mV range for CR10X, 50 mV for 21X and CR7

*** 4200 mV for 21X and CR7, 2100 mV for CR10X

+ 25 mV range for CR10X, 50 mV for 21X and CR7

++ 7.5 mV range for CR10X, 5 mV for 21X and CR7

6.2.3 Example 3, CR1000 Using Differential Channels

Program Example 3 requires six differential channels and the 4WPB100

module to measure the four radiation outputs and the Pt-100 temperature

sensor. The program measures the sensors every 2 seconds and calculates and

stores the following data to final storage every 60 minutes:

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 31 32

Komentáře k této Příručce

Žádné komentáře

Campbell CNR1 Specifikace Strana 21

Komentáře k této Příručce

Související produkty a manuály pro Měření, testování a kontrola Campbell CNR1