Campbell IPn3Gb Manuál s instrukcemi stáhnout pdf (Strana 32)

5.3.8 Point to Point Protocol (PPP) Communications (optional)

The firmware version of the IPn3Gb must be v2.2.0-r2130 or

newer to be able to properly work with the datalogger using the

PPP connection. If required, an update is available from the

Campbell Scientific (Canada) website at:

http://www.campbellsci.ca/19_1_768

In PPP mode, the modem assigns the datalogger an IP address by means of a

serial connection. This allows access to the datalogger’s IP capabilities without

requiring an Ethernet peripheral. The modem’s COM1/Data port must be used

for a PPP connection. In order for the PPP to function properly, both the

modem and datalogger need to be configured as described in Sections 5.3.8.1

through 5.3.8.3, which highlight a standard configuration. The physical

Note

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 49 50

Žádné komentáře

Campbell IPn3Gb Manuál s instrukcemi Strana 32