Campbell LWS-L Návod k obsluze stáhnout pdf (Strana 50)

AIRMAR WeatherStation 150WX Weather Sensor

RM72004,0000154 -19-07MAY13-1/1

RM72004,0000156 -19-07MAY13-1/1

RM72004,000019D -19-07MAY13-1/1

RM72004,0000172 -19-07MAY13-1/1

Mounting Location

Sensor must be mounted away from obstructions that

interfere with readings of temperature, humidity, wind

speed, and the electronic compass. Mounting location

must be:

•

1.8 m (6 ft.) from objects on the same horizontal plane

•

0.5 m (20 in.) above surrounding surface

•

1 m (3.3 ft.) from sources of magnetic field (radio

transmitter, engine, alternator)

•

Unobstructed sky view for GPS signal

Maintenance

NOTE: Do not damage metal plate or blue film

when cleaning sensor.

Contact your John Deere dealer for

replacement parts.

Sensor requires minimal maintenance. Keep sensor free

of insects, dirt, and any other debris.

Replace humidity sensor every two years for optimal

performance.

External Cleaning Of Probe, Sensors, and

Gateway

IMPORTANT: Field Connect components and

connections may not be weatherproof. Properly

close and latch enclosure cover after any

procedure completed inside enclosure.

Do not use pressure washer or common solvents such

as automotive brake cleaning fluid to clean soil moisture

probe, sensors, or gateway. To remove soil from plastic

components, use a solution of soap and water.

Troubleshooting

Ice

If weather conditions indicate ice formation, remove the

weather sensor.

Wind Direction, Wind Speed Values

If wind direction and wind speed values are not accurate,

check sensor position for unobstructed GPS signal.

Temperature Limit

Do not expose sensor to temperatures greater than 65 °C

(149 °F); sensor calibration may no longer be accurate.

Data Not Displayed

NOTE: If data from sensor is not being displayed,

follow these steps.

If troubleshooting indicates sensor damage,

contact your John Deere dealer.

1. Confirm:

- power to sensor

- correct connections

- tight connections

- no kinks in harness

2. Check wind channel for obstructions.

3. Inspect blue, waterproof film for tears, punctures, or

other damage.

4. Inspect silver plate for dents, scratches, or other

damage.

50-2

052813

PN=50

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 71 72

Komentáře k této Příručce

Žádné komentáře

Campbell LWS-L Návod k obsluze Strana 50

Komentáře k této Příručce

Související produkty a manuály pro Měření, testování a kontrola Campbell LWS-L